My Review of the Pachmayr Tactical Grip Glove for Full-Sized Glocks

I was thinking of trying out some of those Rubber Decal Grip Stickers on my Glock 22, but then I noticed that Rubber Slip-On Grips more or less accomplish the same thing. Because of this, I decided to try one out instead. 

'Slip-On Grip Choices'
When it comes to these rubber slip-on grips, there are basically only two major brands for it: Hogue, and Pachmayr. I chose the Pachmayr over the Hogue mainly because of the type of rubber used. These two manufacturers use different types of rubber raw materials and/or blends, and their grips end up with slightly different properties.

Hogue has this sort of "wet" type of rubber that tends to stick into your hands better, but feels a bit messy or "juicy" to me. I got to handle one a lot before on my father's 1911, and I didn't like it very much. Pachmayr, on the other hand, uses a "drier" type of rubber that doesn't stick to your hand as much, which for me is better.

My M4-Based SBR Build: Buttstock Assembly

I have completed the first assembly for my M4-Based SBR build, and it is the Buttstock Assembly. Total price was at P6,547 (approximately USD 152). By US standards, it is shockingly expensive, as I have seen similar assemblies on Amazon sellling for only USD 50 in the US. I was initially thinking of getting a Magpul CTR Stock, but prices of such stocks in Philippine Gun Stores are insane, and I had problems finding an original one from a source that would ship to the Philippines.

The M4 Standard Stock showing the individual parts of the assembly


The M4 Standard Stock with all the individual parts assembled


Even if I could find one, the prices online, while much lower than the insane prices from the Gun Stores, still would've been much more expensive than the Standard M4 Stock. I also thought that in terms of looks, I think the Standard M4 Stock is better than the Magpul CTR as it is sleeker in appearance.

I could've bought these Standard M4 Stocks for much cheaper prices from some Chinese websites, but by the time I "discovered" them, I had already bought most of the items. Besides, I had excess parts from my Glock Machine Pistol build in form of the Tapco Rubber Pad and Buffer Tube, and didn't want them to go to waste, so I just decided to build around them instead.

My Planned M4-Based SBR Build

A couple of months ago, I got rid of my Norinco AK-47 because for the two years it was with me, I was unable to even test fire it in that time due to the change in the political system that caused a tightening of the Permit To Transport for High Powered Rifles (HPRs). However, things have loosened up lately, and it is now easier to get a PTT for HPRs, and this is one of the reasons why I have decided to do an M4 Short Barreled Rifle (SBR) build.

Would it have been more sensible for me to just wait a little longer rather than disposing my AK? Not really, because the lack of the PTT is just one of the reasons I got rid of it. I also found the AK-47 to be a little bit too heavy and front-heavy for comfort. I felt I still would've gotten rid of it in the end.

Lastly, there is one thing I could do with the M4-based SBR that I could never do with the AK-47, and that is to build the rifle from scratch, using my own chosen specifications and parts. There are very few firearms that one can build from the ground up, at least in this part of the world, and one of them is the M16/M4 rifle. This is because the M4/M16 rifle has a lot of users both in the military and civilian sector, which therefore means more demand for parts. This in turn drives manufacturers to make more parts, which become then more easily available in the market.

(Update - July 2012) Magpul Products' Availability in the Philippines

Three months after I posted my first blog about the availability of genuine Magpul Products in the Philippines, I was finally able to buy some of these products. Below is a picture of some of them:

From left to right: Magpul MIAD Grip, Magpul MOE Trigger Guard and Magpul BAD Lever


The parts seem genuine, the packaging is complete and top notch, and the parts themselves seem to be made of genuine high quality Polymer that Magpul is known for, instead of the lesser quality Polymer or even ABS Plastic materials that the copies are made of.

'ebay.ph'
I bought the above items from ebay.ph, from a seller in the US. The prices were great, just a couple of dollars above the typical retail listed prices for these items, way better than the ridiculous prices the local gun stores sell them for. The only problem with these parts is that the availability tends to be inconsistent at best, and this is mainly because the sellers are mostly individuals, not stores, and therefore could only have a few items at a time on their stocks.

My guess is that they buy these on sales, and turn around and sell them online. The available parts on sale is probably only limited, and their budget is also limited, and thus could only stock a few items at a time. So if you see one being sold, I suggest you grab one immediately as they may not be around for long.

My Review for the M4 Collapsible Stock for Glock

After the fiasco of using a Magpul UBR Stock copy for my Glock, which turned out to be too heavy for the unit, I wanted to use the lightest possible M4 Stock available to pair with my Endotactical Tactical Stock Adapter - Glock (TSA-G). After looking around some firearms forums, it turns out that the stock or factory standard M4 Collabsible Stock is among the lightest available.

I chose the standard Mil-spec M4 stock mainly because it was available, and cheaper than the other light stocks like the Colt Super-Stoc of Magpul CTR. In terms of looks, it doesn't look too bad either. I got the "ribbed" version (as opposed to the "dotted" or "ultra-thin" version. Oh, wait, those are for other things, sorry), which I assume to be the more modern one as it allows various accessories to be fitted to the stock if you so desire.

I wasn't able to measure the weight of the stock, but information from the forum threads say they are around 6 ounces, or less than half a pound. Material is reportedly some sort of ABS Plastic, and the workmanship was fantastico! No flashes or other imperfections to be found anywhere on the stock. The finish was quite good, best seen in actual because it doesn't translate very well into digital pictures.

M4-Based Short Barreled Rifle Barrel Selection Considerations

I am planning to assemble my first Short Barreled Rifle (SBR) based on the M4 Carbine platform of my own, and I have been trying to do a lot of reading about how to go about. In the course of my research, I have come across various interesting aspects that I would like to share with other newbies out there.

One of the more interesting facts I found out are the factors one has to consider when choosing the barrel length for an SBR. First, just a quick review of the term "Short Barreled Rifle": It is taken from the United States' Bureau of Alcohol, Tobacco and Firearms (BATF) definition of any shoulder-fired, rifled firearm with a length of less than 16".

Also, note that the standard M16/M4 barrel comes in four general classifications. Below are a listing of them, with the maximum length for each classification noted down next to it:
- Rifle Length, 20"
- Mid-Length, 16"
- Carbine Length, 14.5"
- Pistol Length, 7.5"

My Review of the Ghost Rocket 3.5 lb Connector

Take note that the company "Ghost Inc." also sells a Ghost 3.5lb Connector, which is DIFFERENT from their Ghost 3.5 lb. ROCKET Connector. The main difference between the two, is that their "Rocket" Connector has a "Trigger Control Tab" (TCT) which they claim to also shorten the travel of the Glock Trigger.

I already owned and used the ordinary Ghost 3.5 lb. Connector, and it did a good job of lightening the Trigger pull of my Glock. However, I later realized that I not only needed to lighten the trigger of my Glock, I also have to shorten it, too, and that is why I decided to try out the Ghost Rocket Connector, as it claims to be able to do that. The Ghost Rocket 3.5 lb. Connector also differs from the ordinary Ghost 3.5 lb. Connector in that it while the former is a drop-in change, the latter needs some minor fitting by the user.

I actually only wanted to get the Rocket Connector and the Ghost Armorer's Plate (more on this later), but I could not find anybody who could ship only these two items to the Philippines, so I just decided to buy the Ghost Rocket Trigger Installation Kit for Glocks GEN 1-4. I bought the kit from the "Rock Your Glock" website for USD 41, and which arrived about 3 weeks later. It consists of the following:
- Ghost Rocket 3.5 lb Connector
- 6.0 lb Trigger Spring
- 4.0 lb Striker Pin Spring
- Ghost Armorers Plate
- Ghost Armorers Tool
- Reduced Power Safety Plunger Spring