Using Light Striker Springs on Glocks

Update History:
- Original posted January 6, 2013
- Updated January 19, 2013, add note on use of lightened and extended Strikers
-------------------

In an effort to lighten the trigger of my Glock 22, I have been using a lighter Striker Spring on the unit for the last couple of months, and I just found out lately that using such results in a long-term reliability issue, as I will explain in detail.

'Light Striker Spring'
To lighten the trigger pull of a Glock, there are a couple of ways you can do so, and all involves a simple replacement of parts. You can lighten the Trigger Connector to the most common 3.5 lbs. from the standard 5 lbs; You can also lighten the Safety Plunger Spring. However, the one that will result in the biggest improvement in trigger weight is the use of lighter Striker Springs. 

My Review of the Pachmayr Tactical Grip Glove for Full-Sized Glocks

I was thinking of trying out some of those Rubber Decal Grip Stickers on my Glock 22, but then I noticed that Rubber Slip-On Grips more or less accomplish the same thing. Because of this, I decided to try one out instead. 

'Slip-On Grip Choices'
When it comes to these rubber slip-on grips, there are basically only two major brands for it: Hogue, and Pachmayr. I chose the Pachmayr over the Hogue mainly because of the type of rubber used. These two manufacturers use different types of rubber raw materials and/or blends, and their grips end up with slightly different properties.

Hogue has this sort of "wet" type of rubber that tends to stick into your hands better, but feels a bit messy or "juicy" to me. I got to handle one a lot before on my father's 1911, and I didn't like it very much. Pachmayr, on the other hand, uses a "drier" type of rubber that doesn't stick to your hand as much, which for me is better.

My Endotactical TSA-G Review

'Endotactical TSA-G'
The Endotactical Tactical Stock Adapter - Glock (TSA-G) was actually the main reason for my buying a full-sized Glock. The TSA-G fits only full-sized Glock at the moment, and I felt it was much superior than the GLR440 Stock I used on my Glock 23 as it attaches to the Glock on 2 points, compared to the one point on the GLR440. Because of this, you will have better control of the Glock during recoil.

Another advantage of the TSA-G, is that you can use much more solid stocks built for the M4 Carbine, as opposed to the relatively flimsy 1" width Polymer stock of the GLR440. These two advantages I felt will enable much better control of the weapon during full-auto, not resulting in that diagonal climb to 1-2 o'clock that I found when using the GLR440 stock.

I got what is likely to be a China-copy of the TSA-G from a shop at the Makati Cinema Square (MCS). The reason I think it is a China-copy, are three things: First, is the price. The original sells for USD 150 in the US, while I bought it for only P 3,500 (approximately USD 81). Second thing is that the Retaining Pin that secures the unit to the Glock is made of Polymer, while the ones I saw on the videos for the original TSA-Gs are made of Stainless Steel. I don't think this will be much of a factor on the function of the unit, though.

Third is that there is no small ball chain that secures the Retaining Pin to the TSA-G, while the original always had one. I had to buy a small ball chain from the SM Department stor to secure that Retaining Pin to the TSA-G, and keep it from getting lost during handling.

My Fab Defense KPOS for Glock Review Part Three

'FSSG for the KPOS'
My one and only biggest frustration about the KPOS right now, is making an FSSG work on it. First problem, is that you will need a special FSSG (Fire-Selector Switch for Glock) for it, instead of the usually cheaper, flat, sliding or rotary FSSGs that are more readily available. This is because you need a backplate that will act both as an FSSG, and also as anchor for the removable cocking lever. This means you will have to get the rarer, and more expensive variant of the FSSG.

As for installing the FSSG on the Glock: They replace the backplate, and instead of my usual routine of removing the slide from the frame and replacing the backplate, you needed to replace it while the slide is still attached to frame. This is because the FSSG is bulky, and if you install it on your slide and slide it to your frame, it will snag with some of the frame's protrusions.

The way to install it is to lock back the slide using the slide release, then replace the backplate with the FSSG. This would also mean that you will NOT be able to disassemble the slide from the frame easily, you will have to remove that FSSG first, before you can remove the slide from the frame.

'FSSG Fitting Problem'
I was able to buy an FSSG from Bro Spitfire, and it needed gunsmith fitting. There is a sword-like protrusion on the FSSG that goes forward and backwards, and it controls whether the gun goes full-auto or not. The depth or distance of this protrusion seems to vary per model, and is built oversized so the gunsmith can slowly file away by trial and error the length of that protrusion. So what the gunsmith did was file it down a little, assemble, then test by firing a couple of rounds off.

The second problem was that the Gunsmith didn't turn out to be very familiar with the product, and made a crucial mistake: He got confused on when the FSSG was supposed to go full, or semi-auto. So he put the gun on extended or full auto settings, and then filed it down to semi-auto. The result: The FSSG won't go full auto anymore.

My Fab Defense KPOS for Glock Review Part Two

'Burris Fast Fire II'

The generic Taiwan HUD I was using was giving me a bit of a headache after using it, I think its because they used some sort of a low-power laser for the dot, and I was worried it might be doing some long-term damage to my eyes. So I decided to replace it with a branded one. I chose the Burris Fast Fire II as it is a low-profile sight, and fits well with the low overall profile of the KPOS.

I bought it online, and the unit arrived in an ordinary, unmarked box, not in the original manufacturer's box. It was generously wrapped in bubble wrap to ensure safe and proper transport. It came with a spare battery only, and despite not having any manual with it, I was able to find instructions in the internet on how to replace the battery.

I read in the internet that these Burris scopes are made in the Philippines, and it was confirmed when I saw in the battery well prominently marked saying, "Made in the Philippines". I wonder which local electronics company is making this? 

My Fab Defense KPOS for Glock Review Part One

My experience with the Airsoft EMA Roni Carbine Conversion Kit for Glocks was so positive, that I went out and bought the Fab Defense KPOS Carbine Conversion Kit for my Glock 23. Going to get rid of my other firearms, and am ready to go Glock-crazy.

There were two things that convinced me to by the KPOS instead the Roni; First is that the clearance of the KPOS over the ejection port of the Glock was much wider and lower than that of the Roni. This means less or none of the stovepiping issues I found with the Airsoft Roni.

Second was the fact that the muzzle tube of the KPOS is much bigger and allows for more room for the muzzle blast of expand, unlike the much more enclosed space of the Airsoft Roni's muzzle tube, which resulted in flame damage to the muzzle of my Glock's slide.

This picture shows the kit's clearance over the ejection well

This pic shows the muzzle clearance to the pistol

I bought the unit for P32k at Armscor, and it came with the following items:
- Large, black polymer case with gray foam lining;
- Carbine conversion unit;
- Special rear back plate for use with the KPOS;
- Tool for rear plate removal;
- Manual;
- Under the arm sling;

Airsoft Carbine Kit Conversion Options for Real Glocks

I finally made the jump, and bought an Airsoft EMA Roni Carbine Conversion Kit for my Glock 23. Before I make the review with pics, I would just like to discuss all the airsoft options for the Carbine conversion of Glock pistols as I learned. Take note that all of this was gathered thru informal conversations with the sellers on my way to getting my Airsoft Roni.

I will not be naming the stores or place where I learned these things, first because I am not sure if they will agree to it as I did not ask their permission to reveal these information. Second is I am not sure of the legality of some of these conversions, I think it is sort of a gray area.

I will be discussing options for the Glock, but will spare a paragraph for the 1911 conversion that I saw.

'Main Options for Glocks'
There are about four airsoft options available for converting Glocks into carbines, and these are the Hera-Arms PDW Kit, the Fab Defense KPOS Kit, the EMA Roni Kit, and the Folding Machine Gun Kit.

According to the seller, the Hera Arms Kit was the first kit that was "explored" for use with real guns, and it worked well. The only problem with the Hera Arms Kit, is that it is not as easy to fit your Glock into it, it seems you need to make some permanent changes that will take a bit more time to do. In short, it is not a quick, drop-in conversion like the Roni. I forgot to ask the price for this unit.