(Video) My Glock 22 in its Machine Pistol Mode Part One

They said a picture is worth a thousand words, so a video would be even more so. That's why I decided to take a video of my Glock 22 in what I call its "Machine Pistol Mode" so people can capture a bit more detail that just the words and pictures I have posted here thus far. I intend to make a couple more over the next couple of weeks or months, depending on how much more detail I feel I can share more with videos.

Forgive the mediocre camera focus, I used only a Samsung PL120 Digital Camera. It works very well with still pictures, but apparently not very much with indoor close up videos. I hope I can rectify this on my next videos. So now here is the video itself:

http://www.youtube.com/watch?v=u4NVUuxLP20

My Glock 22 in Machine Pistol Configuration

I was generally satisfied with the Glock 23 Machine Pistol configuration that I assembled, it can easily contain short full automatic bursts into a man-sized target at around 13 meters. However, I felt I could build a better Machine Pistol, one that would enable me to shoot full automatic bursts accurately at even longer ranges. For this reason, I decided to buy a Glock 22, as I felt the recoil-reducing accessories and/or parts necessary for building a better Glock Machine Pistol are only currently available on the full-sized Glocks. 

These recoil-reducing accessories are mainly the Endotactical Tactical Stock Adaptor - Glock (TSA-G), coupled with a Magpul Utility Battle Rifle (UBR) Stock. I have reviewed these separately, you can find them here and here. Aside from this, I also used the CAA Tactical Folding Grip Glock - Small (FGG-S), and a Lone Wolf Compensator (coupled to a Lone Wolf Threaded Barrel).


'First Firing Range Session'
With everything more or less ready, I took my Glock 22 in its Machine Pistol configuration into the shooting range for the first time. I used Target Boards, at my standard range of 13 meters. First test was using the STOCK or FACTORY BARREL, with 50 rounds of Semi-Wadcutter, Teflon-Coated (SWC-TC) reloads in standard .40S&W loadings. Recoil was quite noticeable, with the UBR Stock jumping up and into my shoulders with some vigorousity. 

Glock 23 Machine Pistol Configuration Part Three

'Fab Defense FGG-S'
I chose the Fab Defense FGG-S Tactical Folding Grip over other picatinny foregrips out there, mainly because it definitely was made for the Glock in mind, as it does not only attach to the rails, but also on the lower part of the frame, and the front of the trigger guard. This provides more area to distribute the force applied of the foregrip. This minimizes the flexing of the frame when using the foregrip.

It even has a hook-like protrusion at the upper front of the grip that protects your finger from the muzzle blast. Another item I bought online, which arrived about a week later. The only problem with the grip, is that there is a bit of a gap between the FGG-S and the front area of the trigger guard. This gap allows the frame to flex a bit too much, increasing the gap between the slide and the frame, which I was afraid was going to cause malfunctions.

I decided to put some material to fill that gap between the FGG-S and the frame/trigger guard by using 3M double sided tape (used only one side, kept the backing of the other side intact). I used three layers of the 3M tape to effectively fill that gap, and they seem to work very well in minimizing the the flexing of the frame when force is applied to the FGG-S.



One thing to remember when attaching this grip, is to ensure that you don't overtighten the screw, as Glock says that tightening the screws too much of any attachment on the Picatinny rail will cause the gun to malfunction. There really is no need to tighten too much the screws for this grip, the screw is caught between teeths that keep it from moving back and forth anyway. So just use enough force to lock the screw lightly in place.